{"id":9226,"date":"2026-03-04T16:34:58","date_gmt":"2026-03-04T16:34:58","guid":{"rendered":"https:\/\/stratvideo.com\/preview\/bespoke\/?page_id=9226"},"modified":"2026-03-23T14:52:54","modified_gmt":"2026-03-23T14:52:54","slug":"terms-and-conditions-kilnware-2","status":"publish","type":"page","link":"https:\/\/stratvideo.com\/preview\/bespoke\/terms-and-conditions-kilnware-2\/","title":{"rendered":"Terms and Conditions Kilnware 2"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Kilnware Terms & Conditions<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

PART 1 GENERAL<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

1.1 SECTION INCLUDES<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.     Tile<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 \u00a0 \u00a0Setting materials.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 \u00a0 \u00a0Grout materials.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

D.\u00a0 \u00a0 \u00a0Waterproof membrane.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

E.\u00a0 \u00a0 \u00a0Crack isolation membrane.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

F.\u00a0 \u00a0 \u00a0Flexible sealant.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

G.\u00a0 \u00a0 Penetrating tile and stone sealers<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.2 REFERENCES<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.     American National Standards Institute (ANSI):<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.    ANSI A108 Series\/A118 Series – American National Standards for Installation of Ceramic Tile.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.    ANSI A137.1 – American National Standard for Ceramic Tile<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 \u00a0 ASTM International (ASTM):<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.    ASTM A1064 – Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.\u00a0 \u00a0 ASTM C 144 – Standard Specification for Aggregate for Masonry Mortar. Jobsite mix.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

3.\u00a0 \u00a0 ASTM C 150 – Standard Specification for Portland Cement. Jobsite mix.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

4.\u00a0 \u00a0 ASTM C 109\/C 109M – Standard Test Method for Compressive Strength of HydraulicCement Mortars; Using 2 inch (50 mm) Cube Specimens.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

5.\u00a0 \u00a0 ASTM C645 – Standard Specification for Nonstructural Steel Framing Members.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 \u00a0 Handbook for Ceramic Tile, Glass, and Stone Installation; Tile Council North America, TCNA (HB).<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.3 QUALITY ASSURANCE<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 \u00a0 Ensure Single Source Warranty Requirements and Compatibility of Products: Provide cleaners, sealing and maintenance products, tile grout, setting materials, underlayments, additives, accessories and factory-prepared dry-set mortars from the same manufacturer.\u00a0 \u00a0<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 \u00a0 Mockups:<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 \u00a0 Create an agreed upon sample board size with the desired pattern and grout joint for approval by all parties involved. If a grout joint is not specified, all parties need to be\u00a0made aware of the impact on the tile assemblies this may cause. The mockup needs to be grouted for final approval.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.\u00a0 \u00a0Build mockups to verify selections made under sample submittals and to demonstrate aesthetic effects and set quality standards for materials and execution.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.4 DELIVERY, STORAGE AND HANDLING<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 \u00a0Deliver and store packaged materials in original containers with seals unbroken and labels intact until time of use. Prevent damage or contamination to materials by water, freezing, foreign matter or other causes.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 \u00a0Protect setting materials from freezing or overheating in accordance with manufacturer’s instructions.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 \u00a0Store tile and setting materials on elevated platforms, under cover and in a dry location and protect from contamination, dampness, freezing or overheating.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

D.\u00a0 \u00a0Do not use frozen materials unless specifically allowed by manufacturer.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

E.\u00a0 \u00a0Deliver and store materials on site at least 24 hours before work begins.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

F.\u00a0 \u00a0 Provide heated and dry storage facilities on site.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.5 ENVIRONMENTAL REQUIREMENTS<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 \u00a0Comply with requirements of referenced standards and recommendations of material manufacturers for environmental conditions before, during, and after installation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 \u00a0Maintain environmental conditions and protect work during and after installation to comply with referenced standards and manufacturer’s printed recommendations.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 \u00a0For Interior Applications:<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 \u00a0Do not begin installation until building is completely enclosed and maintaining temperature and humidity conditions consistent with “after occupancy” conditions for a minimum of 2 weeks.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.\u00a0 Maintain environmental conditions and protect work during and after installation to comply with referenced standards and manufacturer’s printed recommendations.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

3.\u00a0 Vent temporary heaters to exterior to prevent damage to tilework from carbon dioxide build-up.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

4.\u00a0 Maintain temperatures at not less than 50 degrees F (10 degrees C) in tiled areas during installation and for 7 days after completion unless higher temperatures are required by referenced installation standards or manufacturer’s written instructions.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

D.\u00a0 For Exterior Applications (for non-freeze thaw areas only):<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Build a temporary shelter and when needed use indirect auxiliary heaters to maintain an adequate temperature level in the working environment and surfaces.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.\u00a0 Exhaust temporary heaters to exterior to prevent damage to the work or injury to personnel from carbon monoxide emissions.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

3.\u00a0 Maintain substrate and ambient temperatures in tiled areas between 50 degrees F (10 degrees C) and 95 degrees F (35 degrees C) during installation and for at least 7 days after completion, unless otherwise indicated in the product instructions and\/or ANSI A108 installation standards.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t

PART 2 PRODUCTS<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

2.1 MANUFACTURERS<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Acceptable Tile Manufacturer: Acceptable Tile Manufacturer: Bespoke Studio, which is located at: 84 Commercial Parkway; Santa Rosa Beach, FL 32459; Tel: 850-660-1613; Email: customerservice@bespokestudio.com; Web: http:\/\/www.bespokestudio.com<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 Acceptable Setting Material and Grout Manufacturer: MAPEI, which is located at: USA 1144 E. Newport Ctr. Dr.; Deerfield Beach, FL 33442; Toll Free Tel: 800-992-6273; Fax: 954-2468805; Email: request info (jwhitfield@mapei.com) Web:http:\/\/www.mapei.com\/US<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.2 SURFACE PREPARATION MATERIALS<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Trowelable Floor\/Wall Patch and Render Mortar: Quick-Setting, Polymer-Modified, Fiber Reinforced, Cementitious Rendering, Patching, and Leveling Mortar, can be applied at 1\/8 inch to 1-1\/4 inch (3 mm to 32 mm).<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI, Planitop 330 Fast.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.3 SETTING MATERIALS<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Modified Dry-Set Cement Mortar: A118.4HET, A118.11 and A118.15HET.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI, Keraflex Super.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 Improved Modified Dry-Set Cement Mortar, Lightweight, Lightweight, Non-Sag: ANSI A118.4HTE, ANSI A118.11, ANSI A118.15HTE, ANSI A138.1, and ISO 13007 C2TES1P1.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI, MAPEI Ultralite Mortar.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 Modified Dry-Set Cement Mortar, Non-Sag, Rapid Setting, for Large and Heavy Tile: A118.4FHT and A118.11 requirements.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI Keraflex RS<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

D.\u00a0 Improved Modified Dry-Set Cement Mortar: ANSI A118.4E, ANSI A118.11, ANSI A118.15E, and ISO 13007 C2ES2P2.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI Kerabond and Keralastic System.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

E.\u00a0 Improved Modified Dry-Set Cement Mortar for Heavy Tile, Rapid Setting ANSI A118.4F, ANSI A118.11, ANSI A118.15F, and ISO 13007 C2FS2P2.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI, Granirapid System.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.4 GROUT MATERIALS<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 High Performance Cement Tile Grout: For grout joints from 1\/16 to 3\/4 inch (1.5 to 19 mm) and meeting ANSI A118.7 and ISO 13007 CGWAF<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI, Ultracolor Plus FA.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 Polymer Ready-to-Use Tile Grout: grout joints from 1\/16 to 1\/2 inch (1.5 to 12 mm).<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI, Flexcolor CQ.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.5 WATERPROOF MEMBRANES<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 General: Manufacturer’s standard product that complies with ANSI A118.10 and is recommended by the manufacturer for the application indicated. Include reinforcement and accessories recommended by manufacturer.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: Products from MAPEI.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.\u00a0 Fluid-Applied Membrane: Advanced liquid-rubber; extremely quick-drying, premium waterproofing and crack- isolation membrane, IAPMO-listed, ANSI A118.10 and A118.12.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

a. Product: MAPEI, Mapelastic AquaDefense.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.6 CRACK ISOLATION MEMBRANE<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 General: Manufacturer’s standard product that complies with ANSI A118.12 for performance and is recommended by the manufacturer for the application indicated. Include reinforcement and accessories recommended by manufacturer<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: Products from MAPEI.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 Fluid-Applied Membrane: Liquid-latex rubber or elastomeric polymer. Flexible bonded crack isolation membrane for use under tile that provides up to 1\/8 inch (3 mm) protection from in plane cracks: Fast setting, flexible, thin, load-bearing complying with ANSI A118.12.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Product: MAPEI, Mapelastic CI.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.7 FLEXIBLE SEALANT<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Sealant: 100 Percent Silicone. Heavy Traffic expansion and movement joints, horizontal and vertical complying with ASTM standards; ASTM – Meets C920, Type S, Grade NS, Class 25, Use T1, T2, NT, I, M, G, A and O, and conforms to C794 adhesion properties, (no. 23 Clear color meets ASTM C920, Type S, Grade NS, Class 50, Use NT)<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1. Product: MAPEI, Mapesil T.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.8 PENETRATING TILE AND STONE SEALERS<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Water-Based Penetrating Sealer: premium, natural-look, that provides maximum protection for tile. Can also be used as a pre-\u00a0 grouting sealer.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1. Product: MAPEI, UltraCare Penetrating Plus Stone, Tile and Grout Sealer.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t

PART 3 EXECUTION<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

3.1 EXAMINATION<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Examine substrates for compliance with requirements for conditions affecting performance of the work. Refer to ANSI A108.01, ANSI A108.02 and if applicable ANSI A108.19.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 Do not proceed with tilework until surfaces and conditions comply with requirements indicated in reference tile installation standard and manufacturer’s printed instructions.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 Underlayment, patching, leveling and rendering materials when needed, must be from the setting materials supplier. For improved warranty and single source responsibility.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

D.\u00a0 Tiles Edges Shorter than 15 inches (381 mm): Allowable Variation: 1\/4 inch (6 mm) in 10 ft (3048 mm) from required plane, and 1\/16 inch (1.6 mm) in 12 inch (305 mm) when measured from high points in the surface.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

E.\u00a0 When purchasing handmade tiles. We recommend 15%-20% overage for breakage, cuts, range, chips, and other inherent characteristics of Zellige.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

3.2 INSTALLATION<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Install tile in accordance with manufacturer’s printed instructions and the applicable requirements of ANSI A108 Series for the materials being used.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 Apply waterproof membrane only in dry weather, when ambient and substrate temperatures are above 40 degrees F (4 degrees C).<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 Waterproofing: Install necessary components to form a watertight installation. Wet film thickness 35mils. Water test previous to tiling.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

D.\u00a0 Install tile in accordance with TCNA methods specified on the drawings.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

E.\u00a0 Install tile in accordance with TCNA methods listed below.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Floor Tile at _____: TCNA method F__ __ __.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.\u00a0 Wall Tile at _____: TCNA method W__ __ __.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

3.\u00a0 Tile on Soffits: TCNA method C31__.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

4.\u00a0 Tile Countertops: TCNA method 51__.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

5.\u00a0 Tile in Pools: TCNA method P601 (thin-set) or P602 (mortar bed).<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

F.\u00a0 Expansion and Control Joints required: TCNA method EJ171.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

G.\u00a0 Apply tile and grout cleaners, sealers and maintenance products in accordance with manufacturer’s printed instructions and technical data sheets.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

H.\u00a0 Pools in non-freeze thaw areas. After minimum of 28-day cure. Confirm with pool manufacturer on the rate of filling being the same as when it was originally filled for the water test, 24 to 30 inches (610 to 762 mm) per day. If the pool water is heated, the temperature should be raised slowly, at a rate not exceeding about 2 degrees F (1.1 degrees C) per hour.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

3.3 GROUTING<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Grout joints in accordance with manufacturer’s instructions and ANSI A108.10.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 Remove standing water, dust, and foreign substances from joints to be grouted.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 Clean and dry tile surfaces.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

D.\u00a0 After grouting, remove all grout residue promptly.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

3.4 PROTECTION<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

A.\u00a0 Floors: Protect from all traffic for at least 72 hours after installation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

1.\u00a0 Do not step on floor for at least 24 hours; if traffic is unavoidable after that, use plywood stepping boards.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

2.\u00a0 Protect from heavy traffic for at least 7 days after installation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

3.\u00a0 When fast-setting materials are used to allow faster occupancy, comply with the manufacturer’s recommendations.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

B.\u00a0 Walls: Protect from impact, vibration, and heavy hammering on adjacent and opposite walls for 14 days after installation, unless manufacturer’s instructions allow a shorter period.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

C.\u00a0 Protect from food products and chemicals which can cause staining.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t

D.\u00a0 Protect from total water immersion for at least 21 days after installation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

Kilnware Terms & Conditions PART 1 GENERAL 1.1 SECTION INCLUDES A.     Tile B.\u00a0 \u00a0 \u00a0Setting materials. C.\u00a0 \u00a0 \u00a0Grout materials. D.\u00a0 \u00a0 \u00a0Waterproof membrane. E.\u00a0 \u00a0 \u00a0Crack isolation membrane. F.\u00a0 \u00a0 \u00a0Flexible sealant. G.\u00a0 \u00a0 Penetrating tile and stone sealers 1.2 REFERENCES A.     American National Standards Institute (ANSI): 1.    ANSI A108 Series\/A118 […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-9226","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/stratvideo.com\/preview\/bespoke\/wp-json\/wp\/v2\/pages\/9226","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/stratvideo.com\/preview\/bespoke\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/stratvideo.com\/preview\/bespoke\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/stratvideo.com\/preview\/bespoke\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/stratvideo.com\/preview\/bespoke\/wp-json\/wp\/v2\/comments?post=9226"}],"version-history":[{"count":214,"href":"https:\/\/stratvideo.com\/preview\/bespoke\/wp-json\/wp\/v2\/pages\/9226\/revisions"}],"predecessor-version":[{"id":9744,"href":"https:\/\/stratvideo.com\/preview\/bespoke\/wp-json\/wp\/v2\/pages\/9226\/revisions\/9744"}],"wp:attachment":[{"href":"https:\/\/stratvideo.com\/preview\/bespoke\/wp-json\/wp\/v2\/media?parent=9226"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}